Packaging

When a box needs a bag!

CombiPlast case/box erector with bag inserter

  • Info
  • Features & Benefits
  • How it works
  • Options

  • Box erecting & bag inserting technology

    The CombiPlast case/box erector with bag inserter is a remarkable and unique machine which combines box erecting- & bag inserting technology in one compact solution. Feeding plano’s and prefabricated bags in, it provides you a bag in box ready to be filled with your product. This with a speed up to 16 boxes per minute. Your boxes are mechanically squared and bottom taped. Optional hotmelt can be implemented. Prefabricated Easy Open bags, with a possible thickness down to 10 μm, are placed tightly in your erected boxes. Bags are perfectly suited for all your box sizes.

    Combiplast - Niverplast

    Plano- & bag store are in ergonomic positions and can be refilled during machine operation! With the use of hotmelt operation time is continuous, otherwise it is only limited by tape length. Change over time to other box sizes is minimized. The CombiPlast is also available with ‘auto adjustable’ option which reduces change over time even more. Thanks to visualisation of warnings and machine functions, the CombiPlast is very easy to operate and maintain.

  • Features

    • Up to 16 boxes per minute
    • Tight bag placing, bag circumference = box circumference
    • Mechanical box squaring on two sides of carton
    • Suited for wide variety of box sizes
    • Prefabricated Easy Open bags
    • Suited for thickness down to 10 μm!
    • Left- or right version possible
    • Very compact design

    Benefits

    • 24 hour non stop production
    • Very easy to operate
    • Bag and blank refill during production
    • On screen HD visualisation of warnings and machine functions
    • Quick box size change over
    • Low maintenance, cost efficient
    • Operates stand-alone as well as in any automatic production line
    • Custom built possibilities on request!

    Guaranteed lowest Total Cost of Ownership!

  • Step 1
    Step 1: Plano folding The plano is taken from the plano store at long and short side with vacuum cups, positioned on a two-sided frame. This frame guarantees a fully square folding without friction between vacuum cup and plano.

    Step 2
    While the box is in the squared position the bottom flaps are mechanically folded. After this two side conveyors transport the box towards the bag inserting position where the bottom flaps are taped as well. Step 2: Bottom flap folding

    Step 3
    Step 3: Bag opening During the box erecting cycle a prefabricated bag is picked up by a vacuum gripper. Thanks to the Easy Open system only one bag side is picked up while the other stays onto the bag store.

    Step 4
    The spreading unit takes over the bag from the bag store. In a downward movement the two spreading plates place the bag tightly over the box corners. Step 4: Bag spreading

    Step 5
    Step 5: Bag inserting While placing the bag, two folding bars move into the box to position the bag tightly in the box corners. In this way the amount of enclosed air between bag and box is minimized.

    Step 6
    The result: a bag in box ready to be filled with your product! Step 6: Bag in box

  • Options

    • Completely stainless steel
    • Fully auto adjustable, no manual settings
    • Add and adjust receipts for each box size
    • Servo driven
    • Extended or shortened blank magazine
    • Hotmelt bottom flap closing
    • Upper flap folding before bag placing
    • Perfectly placed bag

    CombiPlast & EasyPlast perfectly placed bag - Niverplast

contact us We are more then willing to help you.